Get Quotes
Services
Walls
Dry Stack Retaining WallsConcrete Retaining WallsGabion Retaining WallsBrick Retaining WallsStone Retaining WallsTimber Retaining Walls
Building
Retaining Wall BuildersEngineered Retaining WallsRetaining Wall BlocksRetaining Wall Cost
Repairs
Retaining Wall RepairsRetaining Wall DrainageUnderpinning
Ground
Erosion ControlShotcrete BanksBoundary Walls
Company
AboutReviewsContact

Retaining Walls South Africa

Get the best quote, fast
Leaderr approved Retaining Walls South Africa

What are you building?

Retaining Walls South Africa helps you find the best quote, fast, on retaining walls, wall repairs and slope work across South Africa. Describe the slope once - how high, how long and what stands above it - and builders who cover your area reply with prices you can line up side by side.

  • One brief instead of five site visits, so you are not repeating yourself.
  • Wall builders who work in your province, not a national call centre.
  • Ballpark figures below, so you can tell a fair quote from a hopeful one.
  • From LEADERR APPROVED providers, vetted and backed by many verified 5-star reviews. Peace of mind that the wall on your stand is built to a design.
  • No charge to you, and no obligation to accept any of the quotes.

Describe the slope once and get the best quote, fast.

Get the Best Quote

Retaining Wall Prices in South Africa

Ballpark ranges across the common jobs, so you can check a quotation.

ItemBallpark price
Dry stack block wall, per square metre of faceR900 - R2,200
Reinforced concrete wall, per square metre of faceR2,500 - R6,500
Gabion wall, per square metre of faceR1,400 - R3,200
Masonry block wall, per square metre of faceR1,200 - R2,800
Natural stone wall, per square metre of faceR1,800 - R4,500
Timber sleeper wall, per square metre of faceR700 - R1,800
Shotcrete face, per square metreR1,800 - R4,500
Blocks supplied only, per square metre of faceR550 - R1,400
Wall rebuilt after failure, per square metreR1,200 - R3,500
Subsoil drainage behind a wall, per metre runR250 - R700
Erosion control on a slope, per square metreR350 - R900
Precast panel boundary wall, per metre runR550 - R1,100
Underpinning, per pinR6,000 - R18,000
Engineer design and sign-offR8,000 - R45,000

Prices JUST UPDATED. Ballpark figures, rounded, excluding VAT. They reflect typical South African retaining wall, repair and slope rates. They are not our prices or quotations, and no provider is bound by them.

What Providers Quote For

JobTypical scope
New retaining wallsCut, drained and built, priced per square metre of wall face.
Dry stack block wallsInterlocking blocks laid without mortar on a compacted base.
Reinforced concrete wallsCast on site where the load is high and the room is not there.
Wall repairsLeaning, cracked and collapsed walls assessed, drained and rebuilt.
Engineered designDrawings, council submission and sign-off on walls that need it.
Slope and bank workGabions, shotcrete and erosion control where no wall will fit.
Boundary wallsPerimeter walls priced per metre run, which hold nothing back.

How Retaining Walls Are Priced

  • By the square metre of wall face. Height times length, which is the measure almost every quote uses.
  • Not by the size of the stand. A 2m wall over 20m is 40 square metres, whatever the erf measures.
  • Per metre run on a boundary wall. A perimeter wall is sold by its length, because the height is fixed.
  • Per pin or per unit on specialist work. Underpinning is priced per pin and blocks per block or per square metre.
  • Plus the items around the wall. Excavation, drainage, backfill and spoil removal, which rates often exclude.

Which Wall You Need

  • Low garden steps favour timber or blocks. Cheap, quick and sufficient where nothing stands above them.
  • Terraces and platforms favour dry stack. Mass and batter hold the bank, with no steel and no curing time.
  • No room behind favours cast concrete. A narrow footprint and the highest load capacity, at the highest rate.
  • Water running through favours gabions. Free draining and flexible, which is why they suit banks and channels.
  • A cut face with no room favours shotcrete. Sprayed concrete and soil nails hold the face where it already stands.

What Makes a Wall Fail

  • Water, nearly always. A missing or blinded subsoil drain builds pressure the wall was never designed for.
  • Backfilled with the wrong material. Site clay behind a wall holds water instead of letting it through.
  • Compacted too hard, too close. A roller tight against a new wall can push it before the backfill is done.
  • A load nobody designed for. A driveway, a pool or a store added above the wall later on.
  • Built on a guess. Over about 1.5m most municipalities want a drawing, and the reason is this list.

Get prices for your own setup rather than a range.

Get the Best Quote

What to Include in Your Request

  • The address. Suburb and town, so a builder knows whether they work there.
  • The height and length. Measured at the highest point and end to end, even roughly.
  • What is above and below. A house, a driveway, a pool, a boundary or open garden.
  • What the ground is. Rock, clay, sand or fill, and anything you know about the slope's history.
  • Access. Gate width, ground conditions and how close a truck can get.
  • Whether it is new or a repair. An existing wall that is moving is a different job and a different crew.

Before You Accept a Quote

  • Check the wall area it is priced on. Two quotes that differ by half are often measuring differently.
  • Check which system is quoted. Blocks, concrete, gabions and stone are not interchangeable prices.
  • Check the drainage is in it. Stone, geofabric, pipe and where the water comes out, in writing.
  • Check who removes the spoil. A bank cut back leaves more soil than most people expect.
  • Check whether a design is needed. The engineer's fee belongs in your budget, not in a surprise later.

Where Retaining Walls Are Needed Most

  • Sloping stands. Cutting a level platform for a house, a driveway or a garden.
  • Driveways on a fall. Holding the ground beside a ramp that has to reach the street.
  • Pools cut into a bank. The most heavily loaded garden wall most people will ever build.
  • Boundaries between split levels. Where one stand sits above the next and the ground has to stop.
  • Banks that keep washing away. Often an erosion problem rather than a wall problem, and cheaper if caught early.

Frequently Asked Questions

How much does a retaining wall cost in South Africa?

Measured per square metre of wall face, roughly R900 to R2,200 for a dry stack block wall, R1,200 to R2,800 for reinforced masonry and R2,500 to R6,500 for cast concrete. Height, access and whether drainage is in the rate move it more than anything else.

How do I work out the square metres?

Height times length of the wall face, not the area of the stand. A wall 2m high and 20m long is 40 square metres whatever the erf measures, and where the ground falls away the average height is the one to use.

Do I need council approval for a retaining wall?

Usually above about 1.5m, and often sooner if the wall is near a boundary or holds a driveway or structure. The threshold is set by your own municipality rather than nationally, so check with yours before work starts.

Which retaining wall is cheapest?

Treated timber sleepers for low garden steps, and dry stack concrete blocks for anything that has to last. Cast concrete costs the most per square metre and takes the most load, so cheapest and suitable are not always the same answer.

Why do retaining walls lean or crack?

Water behind the wall, in most cases. A subsoil drain that was never built, or has silted up because it was laid without geofabric, lets pressure build until the face moves. Overloading from above and a base that was too narrow are the next two.

Does a retaining wall need drainage?

Every one of them. Clean single sized stone behind the face, wrapped in geofabric so soil cannot blind it, a perforated pipe at the base with a fall, and an outlet where the water can run away. It is the item most often left out of a cheap quote.

How long does a retaining wall take to build?

A small garden wall is often a week on site. A 2m platform wall with drainage and backfill is commonly two to four weeks. Where a design and council approval are needed, that part usually takes longer than the building does.

Can a retaining wall be built against my boundary wall?

It should not lean on one. A boundary wall is not designed to hold ground, and loading it is how both walls end up failing. The retaining structure is built as its own wall with its own base and drainage, clear of the boundary.

Is there a charge for using this site?

No. Send the slope details once and the builders who cover your area reply with their own prices. You are not committed to any of them and nothing is charged to you for the introduction.

Retaining Walls in South Africa

Choose the work you need quoted

Get the Best Quote, Fast

Client Reviews

Powered by leaderr

WhatsApp