What is the wall area?
Retaining Wall Cost South Africa is worked out per square metre of wall face, which is the height multiplied by the length, not the size of the stand. That one measurement is how two quotes become comparable, and it is why a 2m wall costs far more than twice a 1m one. Say the height and the length, and get priced quotations you can line up side by side.
Super easy & fast
- Know what a square metre of wall face should cost before anyone visits, so you never pay too much.
- Send one set of measurements to several contractors, and quotes come back fast.
- From LEADERR APPROVED providers, vetted and backed by many verified 5-star reviews. Peace of mind that the cheapest number on the table is still a wall that stands.
Say the height and the length of the wall, and get prices to compare.
Get the Best QuoteRetaining Wall Cost Prices
Ballpark ranges across every wall type, so you can check a quotation.
| Item | Ballpark price |
|---|---|
| Timber sleeper wall, per square metre of face | R700 - R1,800 |
| Dry stack block wall, per square metre of face | R900 - R2,200 |
| Masonry or brick wall, per square metre of face | R1,200 - R2,800 |
| Gabion wall, per square metre of face | R1,400 - R3,200 |
| Natural stone wall, per square metre of face | R1,800 - R4,500 |
| Shotcrete face, per square metre | R1,800 - R4,500 |
| Reinforced concrete wall, per square metre of face | R2,500 - R6,500 |
| Blocks supplied only, per square metre of face | R550 - R1,400 |
| Bank excavation and trimming, per cubic metre | R120 - R350 |
| Subsoil drainage behind the wall, per metre run | R250 - R700 |
| Engineer design and sign-off | R8,000 - R45,000 |
| Spoil removed from site, per load | R1,400 - R3,800 |
| Typical 20 square metre garden wall, built and drained | R26,000 - R58,000 |
| Typical 60 square metre platform wall, built and drained | R98,000 - R270,000 |
Prices JUST UPDATED. Ballpark figures, rounded, excluding VAT. They reflect typical South African retaining wall, repair and slope rates. They are not our prices or quotations, and no provider is bound by them. A retaining wall is quoted on the SQUARE METRES OF ITS OWN FACE, height times length, not on the size of the stand, so confirm what each quotation includes, such as the wall area it is priced on, the excavation, the drainage behind the wall and who removes the spoil.
How Walls Are Measured
- Square metres of face. Height times length. A 10m wall at 2m high is 20 square metres.
- Measured at the highest point. Most stands fall away, so the face area is bigger than it looks.
- Height includes what is buried. The first course or two sit below ground level and still cost money.
- Length follows the wall, not the boundary. Returns at the ends count, and they are the slowest metres to build.
- Not by the cubic metre. Volume is how the excavation is priced, not the wall.
What Is Usually In a Rate
- Setting out and excavation. Cutting the bank and trimming the founding line.
- The founding layer. A compacted base, or a concrete strip on poor ground.
- The wall material, laid. Blocks, concrete, stone, baskets or sleepers, built to the stated height.
- Basic backfill. Filling behind the wall in layers as it rises.
- Site clean up. Which is not the same as removing the spoil from the property.
What Is Usually Out of It
- Engineer design and sign-off. A separate professional fee on anything over about 1.5m.
- Spoil removal. Often the largest surprise, and it is charged by the load.
- Full drainage. Clean stone, geofabric and a piped outlet are frequently quoted separately.
- Capping and handrails. A finished top edge and anything the drop needs for safety.
- Reinstating the garden. Irrigation, paving and lawn disturbed by the work.
Get a price for your own wall rather than a range.
Get the Best QuoteWhat Affects the Price
- Height, more than anything else. A taller wall needs a wider base and more reinforcement per square metre.
- Which system is priced. The ladder from sleepers to cast concrete spans about five times.
- What stands above the wall. A driveway, a pool or a building is a load the design has to carry.
- Ground conditions. Rock means breaking, clay means a wider base and more drainage.
- Access. Barrow work instead of machine work can add half again on labour.
- Spoil. Levelled on site costs nothing to cart and removal is charged by the load.
- Whether a design is required. Over about 1.5m most municipalities want drawings, and that is a separate fee.
What to Include in Your Request
- The address. Suburb and town, so a contractor knows whether they work there.
- The height and the length. Measured at the highest point and end to end, even roughly.
- What stands above and below. Open garden, a driveway, a pool, a boundary or a building.
- What the ground is. Rock, clay, sand or fill, and anything you know about the slope.
- Access. Gate width, ground firmness and how close a truck can get.
- Whether spoil must leave. Room to level it on site changes the total noticeably.
Before You Compare Two Quotes
- Check both are per square metre of face. A rate per metre run of a wall of unstated height compares with nothing.
- Check the stated height. One quote at 1.8m and one at 2.2m are not the same wall.
- Check which system each is pricing. Material is the biggest single difference between two honest numbers.
- Check whether drainage is in or out. It is the line most often missing from the cheaper quote.
- Check who pays for the spoil. By the load, and it adds up fast on a platform cut.
- Check what the design fee covers. Drawings only, or drawings plus inspections and a completion certificate.
Retaining Wall Cost FAQs
How much does a retaining wall cost in South Africa?
Per square metre of wall face, roughly R700 to R1,800 for treated timber, R900 to R2,200 for dry stack blocks, R1,400 to R3,200 for gabions and R2,500 to R6,500 for reinforced concrete. A 20 square metre garden wall, built and drained, commonly lands between R26,000 and R58,000.
How do I work out the square metres of my wall?
Multiply the height at its highest point by the length the wall runs, and add any returns at the ends. Include the course or two that will sit below ground level. That figure, with the material, is enough for a contractor to give you a usable number before visiting.
Why does doubling the height more than double the price?
Because the base grows with the wall. A taller wall needs a wider footing, more reinforcement, deeper excavation and often geogrid or an engineer's design, so the rate per square metre rises as well as the area. Height is the most expensive dimension on any retaining wall.
What is the cheapest retaining wall?
Treated timber sleepers for low garden steps, and dry stack concrete blocks for anything that has to stand for decades. Cheapest and suitable are not always the same answer, and a wall that fails costs the full price again plus the clean up.
Is the engineer's fee included in a builder's quote?
Usually not. Design and sign-off by a professional engineer registered with ECSA is a separate appointment and a separate fee, commonly R8,000 to R45,000 depending on the wall. Ask whether the quote assumes a design already exists.
Knowing the rate before anyone visits is what most people come to Retaining Walls South Africa for, and it is the quickest way to tell a fair quote from a hopeful one.
Related Services
Get the Best Quote, Fast
Client Reviews
Powered by leaderr

